Service List

Paintwork/Body

​

We begin with a gentle snow foam pre-wash to safely loosen dirt without disturbing your existing protection. This is followed by a safe two-bucket hand wash using soft mitts and pH-neutral shampoo to preserve ceramic coatings, waxes, or sealants. The vehicle is then carefully dried with plush microfibre towels or an air blower to avoid introducing swirl marks.

​

Glass

​

All exterior glass is cleaned to maintain clarity and remove light dust, smudges, or water spots—leaving your windows streak-free and spotless.

​

Tyres & Wheels

​

We thoroughly clean the wheels and tyres, removing surface dirt and light brake dust. A fresh application of tyre dressing restores that clean, dark finish, keeping your car looking freshly detailed.

Paintwork/Body

​

We begin with a pre-wash to gently loosen dirt and grime, reducing the risk of scratches. This is followed by a snow-foam and safe two-bucket hand wash using high-quality shampoo and soft mitts to clean the vehicle’s paintwork without damaging the finish or existing protection. The car is then dried using plush microfibre towels or a contactless air blower to avoid swirl marks.

​

Glass

​

All exterior glass is carefully cleaned using streak-free glass cleaners, ensuring clear visibility and a polished finish. This includes front and rear windscreens, side windows, and mirrors.

​

Tyres & Wheels

​

Wheels are treated with dedicated cleaners and brushed thoroughly to remove brake dust and road grime. tyre are then dressed with a satin or gloss finish, restoring a fresh, dark look that completes the detailed appearance.

**Including Decontamination Wash**

​

Paintwork/Body

​​

A layer of snow foam is applied to loosen surface contaminants before a careful two-bucket hand wash using pH-neutral shampoo, soft mitts, and detailing brushes. We pay close attention to door and boot sills, badges, grill as well as the fuel cap area, to ensure a complete and consistent clean. For added water behaviour and a temporary boost in gloss, a rinse aid can be applied during the final rinse. Exterior trims are dressed and sealed. This is all done prior to any clay bar treatment. Clay bar lubricant 

​

Glass

​

Tyres & Wheels

​

A full chemical decontamination follows, targeting iron fallout, tar, and adhesive residues. A second snow foam layer ensures pH balance before a clay bar treatment removes any remaining bonded contaminants from the paintwork and glass. The vehicle is then dried using plush microfibre towels and an air blower for a spotless, swirl-free finish. The engine bay is cleaned and dressed to restore a tidy, factory-fresh appearance.

 

Glass is polished and treated with a rain-repellent coating, and exhaust tips are cleaned and sealed to complete the service with a crisp, well-maintained finish.

A professional interior detail goes far beyond a basic valet. It’s a deep-cleaning, restorative process that tackles every surface inside the vehicle — from the headliner to the footwells — using specialised tools and techniques.

​

​Initial Assessment & Prep

• Inspect interior for condition, stains, pet hair, smoke smells, etc.

• Remove floor mats, loose items, and rubbish

• Check sensitive materials (e.g., Alcantara, leather) for product compatibility

 

​ Compressed Air Blowout

• Use soft detailing brushes and air tools to agitate and blow out dust from vents, crevices, seat rails, stitching, etc.

• Loosens debris for easy extraction later

​

Full Vacuum Extraction

• Thorough vacuuming of carpets, seats, mats, boot, and all nooks & crannies

• Lift seats (if possible) to reach hidden debris

​

Carpet & Upholstery Shampooing

• Use carpet extractors or spray-on fabric cleaners

• Agitate with a drill brush or hand brush

• Extract dirt and moisture

​

Leather Cleaning & Conditioning (If applicable)

• Clean leather with pH-balanced leather cleaner

• Gently agitate using a soft leather brush

• Wipe dry and apply a leather conditioner or protectant

​

Plastic & Trim Cleaning

• Clean interior plastics with APC or dedicated interior cleaner

• Agitate with detailing brush

• Dress or protect with satin/matte finish dressing

​

Headliner Cleaning (As needed)

• Light mist of fabric cleaner, gentle agitation, no over-saturation

• Pat dry with a clean towel

​

Glass Cleaning (Inside)

• Use a dedicated streak-free glass cleaner

• Wipe using a waffle weave or glass towel

​

Deodorising / Odour Treatment

• Use enzyme-based odour neutralisers

• Spray into carpets, vents, and under seats

• Optionally, ozone treatment for smoke or pet odours

​

Final Touches & Protection

• Apply fabric protection or leather guard if requested

• Replace mats, adjust seat positions

• Double-check all glass and touchpoints for smears or residue

• Light interior scent added if desired

*Including all decontamination and exterior detail*

​​

Paint correction is the process of removing swirl marks, light scratches, oxidation, and other defects from a vehicle’s clear coat using machine polishing. It restores clarity, depth, and gloss to tired or damaged paintwork, often improving the finish beyond showroom condition.

​

Paintwork Inspection & Thickness Readings

• Inspect under multiple light sources (sun gun, LEDs, torches)

• Use paint depth gauge to check thickness of clear coat

• Identify RIDS, swirls, holograms, and sanding marks

​

Test Spot / Polish Selection

• Test a small section using different pad/compound combinations

• Evaluate correction level and finish clarity

• Lock in the safest, most effective process

​

Single-Stage Polish (Gloss Enhancement)

• Light compound or polish on medium pad

• Removes up to ~60% of swirls and haze

• Ideal for newer or well-maintained paint

​

Two-Stage Correction (Standard Paint Correction) *if needed*

• Step 1: Compound with cutting pad to remove defects

• Step 2: Finishing polish with soft pad to refine gloss and remove haze

• Removes 80–90% of defects

• Most popular service for daily drivers

​

IPA / Panel Wipe Down

• Remove polishing oils and residue with isopropyl alcohol or a dedicated panel wipe

​

Paint Protection Application

Client can choose:

• Spray sealant (3–6 months protection)

• Carnauba wax (traditional depth & warmth, 2–4 months)

• Ceramic coating (long-term protection, high gloss, hydrophobic, 1–5+ years depending on product)

​

Final Inspection & Finishing Touches

• Check for residue, missed spots, or pad trails

• Dress tyres and exterior plastics

• Clean glass and polish exhaust tips​​

What is Paint Protection?

Paint protection is the final step after a detail or paint correction. It’s designed to shield your vehicle’s paintwork from environmental damage, preserve gloss, and make maintenance easier. Without protection, your freshly polished paint is vulnerable to UV, dirt, bird droppings, water spots, and fading.

​

Spray Sealant (Entry-Level Protection)

• Durability: 2–3 months

• Application Time: ~15 minutes

• Benefits: Hydrophobic, quick, cost-effective

• Often applied as a top-up after every wash or post-polish

 

Carnauba Wax

(Traditional Finish)

• Durability: 1–3 months

• Finish: Warm glow, deep shine

• Application: By hand or machine

• Downside: Needs regular reapplication, not as durable as synthetic options

​​

Synthetic Sealants (Mid-Tier Protection)

​

• Durability: 4–6+ months

• Finish: Glossy, slick, more durable than wax

• Chemically resistant and water-repellent

​

Ceramic Coating (High-End Protection)

​

• Durability: 1–5+ years depending on product

• Finish: Ultra-deep gloss, extreme hydrophobicity, UV & chemical resistance

• Application: Requires paint correction and proper prep

​